What you have
to know to start with Linux
The Linux Operating System
is a public domain, UNIX-like operating system which runs on PCs,
and enables them to network with other more powerful UNIX computers.
The networking environment provided by Linux and a couple of Sun SparcStation
computers, allows us to provide users with access to advanced CAD
and software development environments, the Internet, and other UNIX
resources.
Identifying the Workstation You're On
Linux workstations within the teaching network generally have a small
(orange) sticker next to their power switch, with the number "xxx"
on it. This indicates that the workstation has an IP address of "129.78.99.xxx".
You should quote this number to support staff in the event that the
workstation appears to be malfunctioning.
Getting Help
The main people involved in running the teaching network are
ITU staff located in J13-412. You may also contact Dhruba
Roy in J13-417.
To report problems with the network, computers, and/or services, or
to seek assistance on any computing related issue affecting your undergraduate
studies, please send e-mail to helpdesk.
Booting the Linux Operating System
In the following, it is assumed that the PC you are about to use is
not currently being used by someone else - please consider the rights
of others, when using laboratory computing facilities.
The operating system which is to be run on a given laboratory PC is
selected at power-up. If the PC you are about to run Linux on is powered
up, but not running Linux, then you should power it down, shutting
down gracefully as appropriate, and in accordance with the requirements
stipulated for the operating system in question (see the appropriate
section of this guide).
If the PC you want to use is already running Linux, and it is not
currently being used by anyone else, it will be displaying the X-Display
Manager ("xdm") log-in screen, and you should proceed to
the sub-section on "Loggin-In to Linux".
If the PC you want to use is powered down, power it up - booting the
Linux operating system from the "Boot Menu":
Select Linux using the {up}/{down} arrow keys; Boot Linux by depressing
the {enter} key.
Logging-In to Linux
You are required to log-in to the Linux computing
environment. Your "username" and initial password will be
the same as those used in the MS-DOS environment.
The Linux environment provides you with a "home" directory
in which you can store your work and other data. The same space limitations
as described in section 9, apply to your "home" directory
under Linux. Under normal circumstances, you control _all_ access
(except for "super-user" access) to this area - you should
do all you can to ensure that things stay this way. You may guard
against exposing your data to unauthorised access by ensuring that
you use a suitably robust password (see "Choosing a Good Password"),
and by remembering to log-out (see "Logging-Out From Linux")
at the end of your computing sessions.
To Log-in: at the Linux "xdm" (X Display Manager) log-in
screen, type your "username" and "password" as
follows:
username {enter}
password {enter}
You will now be logged-in to the Linux (workstation)
environment.
IMPORTANT: Your password should
be changed immediately upon logging in to Linux for the first time
(see "Logging-In to Linux for the First Time").
After logging-in, you will be presented with
an initial desktop environment. The default desktop environment
comprises the following components:
The "fvwm" ("X11R6" compatible)
virtual windows manager, which provides you with a graphical user
interface; A terminal window ("xterm") onto the local
host (the PC), which provides you with a command-line interface
to the local host; An "xclock" in the top right-hand corner
of the screen.
Have a look at your ".xsession", ".cshrc",
and ".login" start-up files,
for clues on customising your initial desktop environment.
Logging-In to Linux for the First Time
If you are logging-in to Linux for the first
time, it is important that you change your password from its initial,
easily determined value, to a more suitable (and secure) one of
your choosing. This is essential, if you are to protect your work
from unauthorised access, and to assist us in providing a more secure
computing environment. Read the following sub-section to get some
hints on choosing a suitable password, then login as described above,
and proceed to "Changing Your Linux Password".
Choosing a Good Password
Simson Garfinkel and Gene Spafford in their
book "Practical Unix Security" (O'Reilly & Associates,
Inc) have this to say about choosing a good password:
Good passwords are passwords that are difficult to guess.
In general, good passwords:
- Have both uppercase and lowercase letters;
- Have digits and/or punctuation characters
as well as letters;
- Are easy to remember, so they don't have to
be written down;
- Are seven or eight characters long;
- Can be typed quickly, so somebody cannot follow
what you type by looking over your shoulder.
It's easy to pick a good password.
Here are some suggestions:
Take two short words and combine them with a
special character or a number, like robot4my or eye-con.
Put together an acronym that's special to you,
like Notfsw (None of this fancy stuff works) or AUpegc (All UNIX
programmers eat green cheese).
(Of course, robot4my, eye-con, Notfsw, and AUpegc
are now all bad passwords because they've been printed here.)
And, don't foget, if it's in some dictionary,
it's not suitable for use as a password!
Changing Your Linux Password
Your password in the Linux environment is
maintained by Sun's Network Information Services (NIS) running on
our Sun computers. To change your password, you need to be logged-in
to one of these computers ("diesel" or "comlab").
You may log-in to one of the Suns using the "rxterm" utility
script as follows:
rxterm diesel {enter}, or
rxterm comlab {enter}
This causes an additional "xterm" window
to appear on your current screen. The command-line available to
you within this window is processed by the Sun SparcStation - within
this window you are logged-in to that SparcStation. You should change
your password by invoking the NIS "yppasswd" program on
the command-line within the "xterm" on the SparcStation
as in the following:
yppasswd {enter}
The "yppasswd" program will ask you
to enter your current password. This is to establish that you are
the authorised user of the account being used. Enter your current
password:
old-password {enter}
And when asked by the program, enter your new
password:
new-password {enter}
And, when asked to confirm it, re-enter your
new password:
new-password {enter}
Assuming all has gone well, you have now successfully
changed your Linux (and SunOS) password.
Using The Mouse
The "X11R6" graphical user interface
provided by the "fvwm" virtual windows manager is a very
powerful GUI environment. In particular, it supports 3-button mouses.
The 2-button (IBM PC style) mouses found on our Linux workstations,
emulate the operation of 3-button mouses as follows:
The left and right buttons of the 2-button mouse
match those of the 3-button mouse; Simultaneous operation of both
the left and right buttons of the 2-button mouse matches the middle
button of the 3-button mouse.
Using the mouse you are able to: select; resize;
iconify; drag; drop; activate; etc. the various objects and applications
appearing on your desktop. You may find it useful to search out
a good introductory text on using the X Windows System - you may
find that you can use it straight away using your intuition. In
any event you should find this environment fun to use.
Using "rxterm" to Log-In to diesel
& comlab
To log-in to one of the Sun computers we recommend
you use "rxterm" in preference to "rlogin" (see
man rlogin). To log-in to either of the Sun computers, type:
rxterm comlab {enter}, Or
rxterm diesel {enter}
within your "xterm" on the local Linux
host. This causes an additional "xterm" window to appear
on your current screen. The command-line available to you within
this new window is processed by the Sun SparcStation - within this
window you are logged-in to that SparcStation.
One of the benefits of "rxterm" is
that in addition to logging you in to the remote computer (eg. "comlab"
or "diesel"), it also sets up your local and remote environments,
so that you are able to run "X" applications ("clients")
on the remote computer, with their output being produced on the
display attatched to your workstation (local host) - the workstation
is providing an X-windows server for client applications running
on the remote computer(s).
Try typing: /usr/openwin/demo/xeyes &
within the remote "xterm", to see a
demonstration of such an application (running in the background).
Doing Laboratory Experiments
At the time of writing, there are two laboratory
experiments which utilise the resources of the UNIX computer network.
What follows is a guide to getting you started in these experiments.
You should direct any course related queries to the tutor and/or lecturer
concerned.
Starting Magic
This application is run "locally"
on each Linux workstation. To start "magic" on your Linux
workstation, type:
magic -dX11 filename {enter}
within your "xterm" on the local Linux
host. Refer to your notes on "magic" for more information.
Doing the Image Processing Laboratory Experiment
This experiment requires you to copy "template"
files from some prescribed area, and to perform minor edits upon them
during the course of the laboratory.
In order to do this laboratory, you will need
to log-in to one of the Sun computers ("comlab" or "diesel").
Refer to the sub-section entitled "Using "rxterm"
to Log-In to diesel & comlab" and log-in to one of these
computers.
Note: "comlab" is owned by the Communications
group, so you should probably log-in to "comlab" for this
experiment.
Refer to the "Getting Hard Copy" sub-section
for notes on producing print-outs of your graphical images.
Refer to your notes on the "Image Processing"
experiment for any further information.
Getting Hard Copy
There are two,(2) main network printers available.
These printers are located within the Digital Systems Laboratory (J13-424),
and the Digital Communications Laboratory (J13-417). Each of these
printers is Postscript compatible.
To print to the network printers, you should
preferably be logged-in to "diesel" (or "comlab").
By default, text files are printed in a reduced font at 2 pages
per A4 sheet. This action can be defeated using the "-l"
option to the print ("lpr") command.
Note: In the following, it is assuming that you
haved logged-in to one of the Sun computers.
To print a file (plain text or postscript), type:
lpr -Pprinter filename {enter}
Use: printer=dsps1 to specify the printer in
the Digital Systems Laboratory; printer=dcps1 to specify the printer
available within the Digital Communications Laboratory.
To print a UNIX text file at normal size, type:
lpr -l -Pprinter filename {enter}
To print MS-DOS generated files (lines ending
in ^M), type:
lpr -f -Pprinter filename {enter}
Occasionally, the Linux filter rejects a text
file because it gets confused by the contents of the file (Linux
does not recognise the file as text - even though it actually is).
If you suspect this is happening, issue the command:
file filename
within a Linux "xterm" (the Linux filter
program uses this command also, when attempting to determine the
type of file being processed). If the command indicates some file
type other than text, then try putting a blank line at the start
of the file, and test the resultant filetype by running the "file"
command again.
Some MS-Windows programs also put a ^D character
at the start of Postscript files. This confuses the Linux filter
program also. In this case you should use the "-f" option
to the "lpr" command.
If you are doing the "Image Processing"
experiment, you may wish to produce hard copies of your graphs and
images (Note that for performance reasons, you should specify the
printer in the Digital Systems Laboratory when printing graphics
and/or images):
To produce hard copies of graphs:
Use "xgraph" to produce a "postscript"
file by selecting "hardcopy", and specifying "file"
as the output device.
Then, type:
lpr -P dsps1 filename {enter}
To produce hard copies of images (by courtesy
your fellow students) you need to perform a sequence of operations:
Use "xv" to "fire-up" (in
the background) the image you wish to print:
xv image_file & {enter}
Use "xwd" to "dump" the X-windows
image:
xwd -nobdrs -out xpr_infile
Click the left button of your mouse to select
the image which is to be printed. Use "xpr" to convert
the image to Postscript format:
xpr -device ps -output outfile.ps -gray 4
-portrait xpr_infile {enter}
Then print the image out using "lpr":
lpr -P dsps1 outfile.ps {enter}
And, clean up:
rm -f xpr_infile outfile.ps {enter}
Alternatively, you may prefer to run a script
named "xvp" which is available on "diesel",
and which incorporates the above commands (semi-automating the process):
Use "xv" as in the previous approach:
xv image_file & {enter}
Then start the "xvp" script:
xvp {enter}
Click the left button of your mouse to the image
which is to be printed.
When the script terminates, "xpr_infile"
produced by "xwd", and "outfile.ps" produced
by "xpr" are deleted. This is done after "outfile.ps"
is despatched to the print queue.
Please .... follow the example of this script
- delete your postscript file(s) when you are done with them, this
will conserve disk space (you can always re-produce them again later
if required):
To conserve disk space remove un-necessary files:
rm -f filename (...filename) {enter}
Reading and Sending Electronic Mail
The domain name for the teaching network is
"eelab.usyd.edu.au". Your e-mail address is therefore "username@eelab.usyd.edu.au".
You can read and send e-mail using "mail"
or "pine" on the Linux workstation (not recommended) or
within a Sun log-in onto one of the Sun computers. For a more intuitive
interface (recommended), you can run "xmailtool" on "diesel",
or "mailtool" on "comlab" from some remote "xterm"
running on your X-Windows desktop.
To run "xmailtool" (on "diesel"
only) for example, you would:
rxterm diesel {enter}
then, within the "xterm" on "diesel":
xmailtool -fn 10x20 -color & {enter}
Which runs the program in the background (and
in colour) using a large font.
If you prefer to use "mailtool" on
"comlab" don't specify the "-color" option:
rxterm comlab {enter}
then, within the "xterm" on "comlab":
mailtool -fn 10x20 & {enter}
The user interfaces of these mailers are quite
intuitive to use. Why not try sending yourself a test e-mail message?
Just click on "compose", address the message to yourself,
type in some text, and click on "send" to despatch it.
Click on "done", and the mailer iconifies onto your desktop.
On arrival of the test message, your mailer issues a , and
indicates that new mail has arrived by changing the form of its
icon. Double-click on the mailer's icon, and you will be able to
read the message. Under normal circumstances, after reading each
message, you would decide whether or not to save the message (into
your home directory - just click "save" in your mailer)
before removing it from the system "spooling" area on
"diesel" (click "delete" in your mailer).
Important: Please be sure to
remove your mail from the system spooling area, whenever you read
your mail. If you want to retain your e-mail, do so by saving it
to your mail directory.
As was indicated earlier, we do not recommend
you access your e-mail from the Linux workstation. The mail queues
on Linux are cleared at 15 minute intervals, if you can't be sure
that the workstation won't be shutdown in the next 15 minutes or
so, you should send your e-mail from a Sun log-in.
Using Netscape to Browse the Web
The Linux workstations have the Netscape X-Windows
Web browser installed. Netscape is configured to initially load the
University of Sydney home page. You should find that other parameters
specified in ".netscape-preferences" have been customised
to reflect your personal details.
To start Netscape:
netscape & {enter}
Using "mtools" and "tar"
to Read/Write to Floppy Diskette
If you wish to transfer files between your
filespace on Linux, and the floppy disk drive, you may use "mcopy"
(Microsoft copy - try "man mtools"), or "tar"
(originally the tape archiver - try "man tar").
The "mcopy" command produces Microsoft
compatible target files (ie. MS-DOS can read them). Be careful with
wildcards on the MS-DOS side of the filespec - you need to enclose
them in quotes to protect them from the UNIX shell. For example,
you could transfer a group of MS-DOS source files as follows:
mcopy "a:\dir\filename.*" some_unix_directory
{enter}
While, going the other way:
mcopy unix_directory/filename.* a:\directory
{enter}
Quotes are not needed unless "/" is
used in the MS-DOS part.
The "tar" command is a very powerful
command, which produces an archive file on diskette (or a series
of diskettes using the "-M" option). The archive file
format is not supported by MS-DOS. You may use the "tar"
command to copy entire directories. For example, let's suppose that
you have two important directories in your home directory (eg. assignments,
and reports) that you want to move to floppy diskette in order to
make them more secure, you might use the following sequence of commands:
cd $HOME {enter}
tar cphvf /dev/fd0 assignments reports {enter}
rm -rf assignments reports {enter}
Where:
"/dev/fd0" specifies floppy drive
zero (a:);
"c" means create;
"p" means preserve the filemode of
files;
"h" means don't dump symbolic links
(dump the files they point to);
"v" means be verbose;
"f" specifies that a file is
to be used as the target (we are creating an archive here - when
extracting an archive specified by "x", use of "f"
would specify that the source is a file).
And, to restore the directories, you would
perform the following sequence of commands:
cd $HOME {enter}
tar xphvf /dev/fd0 {enter}
Using Other Applications
Various other applications are available under
Linux and/or within Sun log-ins on "comlab" or "diesel".
These include:
"ftp" (all), "telnet" (all),
"xmosaic" ("diesel"), "xv" (all),
"xmag" (all), "xman" ("linux"), "xeyes"
(all), "xarchie" ("diesel"), ....
Have a look at the "Applications" sub-menu
available from the pull-down "Utilities" menu under "fvwm",
you will find other applications such as:
"xfig" a drawing program, "xspread"
a spreadsheet, ....
Accessing On-line Help
You should explore the "xman" program
which is available on the Linux "fvwm" desktop. This application
is to X-Windows, what "man" is to a text based environment.
It allows you to read the manual entries (the on-line documentation)
for the various commands, utilities, file formats, etc which are used
by Linux.
Note: For on-line help for SunOS commands etc.
you should run the "man" command within the remote "xterm"
of one of the Sun computers. Also, be aware that operation of a
given command may differ in the two environments.
Start "xman" from "fvwm"
on the Linux workstation as follows:
Select Xman from the pull-down "Utilities"
menu
The "Manual Browser" icon appears on
the desktop. To commence reading the manual:
Activate Manual Page on the "Manual Browser"
icon
Note that you may open multiple manual pages
- repeat the previous step to view additional pages.
Logging-Out From Linux
In order to guard against exposing your data
to unauthorised access it is imperative that you remember to log-out
at the end of your computing sessions. To log-out at the end of your
sessions:
Close-down your applications: Activate
the application's pull-down menu by clicking the left mouse button
on the top left-hand corner of its controlling window;
Select {destroy} (using the left mouse button). Close-down
the virtual windows manager ("fvwm"):
Activate the "Utilities" pop-up
menu by clicking the left mouse button while moving the mouse anywhere
within the "root window" (the background area);
Select {Exit Fvwm} (using the left mouse button). This logs you out.
The display manager ("xdm") then presents the log-in screen
for authentication of the next user wishing to log-in to the Linux
environment.
Shuting-Down Linux
Like other complex operating systems environments
(including OS/2 and Windows NT) Linux should be powered down gracefully.
If you simply "pull the plug" and turn the power off, then
the next time Linux boots, it will complain that its file system is
corrupt. It will then attempt to recover from the situation, but may
find that it is unable to do so, requesting that remedial action be
taken by support staff.
To shut-down the workstation when Linux is running:
Log out
as described in the sub-section "Logging-Out From Linux";
Depress
Control-R (^R) to close-down the ("xdm") display manager;
Depress
Control-Alt-Delete to shut-down Linux.
Linux will now shut-down gracefully, unmounting remote filesystems,
and keeping its own filesystems intact.
Les Catterall
